2.0 mm Locking T Plate 5 Holes 32 mm Long [T2020532LOCK] (376452) - T-Plates | www.kruuse.com

Find produkt

2.0 mm Locking T Plate 5 Holes 32 mm Long [T2020532LOCK]

376452

Locking plates have numerous advantages over more conventional implants, and over the past year, David Strong, our Product Development Manager, has been working on a range of T-plates that use locking technology to capitalise on these. They are proportioned for use on distal radial fractures, but should be useful elsewhere too.

Forventet levering Varen lagerføres ikke – spørg Kundeservice efter forventet leveringstid.

2.0 mm Locking T Plate 5 Holes 32 mm Long [T2020532LOCK]

376452
All of the plates in our locking T-plates have been designed with an additional small hole between the two most proximal screw holes. This will permit the engagement of positional aides such as an A-wire or the tips of pointed reduction forceps. 2.0mm Locking T-Plates. Designed to use locking screws only, these implants do not have the stacked locking feature common on many of our larger locking implants. These are therefore unsuitable for use with standard cortical/cortical selftap screws. For fragments that are only big enough to accommodate two screws side by side, our locking plates will grab these small fragments very securely indeed. Being a mere 1.3mm thick and with limited contact undercuts, these implants minimise some of the negative biological effects of plating on the surrounding soft tissues. The limited contact undercuts also go further in that they reduce the stress riser effects at empty screw holes allowing for more consistent contouring and improved cycle life. The A-wire/reduction forceps hole is 1.2mm in diameter. Scaled plate profiles are available.

Alternative produkter

 

Relaterede produkter

 
jul16
nyhedsbrev
vitalchew